Wi-Fi site surveys and robot service for Maine, New Hampshire and Vermonthello@granitecoastrobotics.com
Home / Guides

Why Wi-Fi drops in plants and warehouses, and what a site survey finds

Wi-Fi in plants and warehouses usually fails for a handful of reasons: metal racking and machinery block or reflect the signal, stock levels change the building week to week, access points were placed for an office layout, and scanners, tablets or robots hold on to a far access point instead of roaming to a near one. A site survey measures coverage, roaming and interference where people and devices actually work, and turns that into a ranked fix list.

The usual causes

  • Racking and metal that shift with inventory
  • Access points mounted too high or placed for an office, not aisles
  • Sticky clients: devices that do not roam to a closer access point
  • Channel overlap between neighboring access points and nearby buildings
  • Interference from motors, welders, microwaves and other equipment
  • Old devices that only speak older Wi-Fi standards and slow everyone down

What a survey measures

  • Signal and signal-to-noise in every aisle, dock and work area
  • Roaming while walking or driving real routes with real devices
  • Channel use and interference
  • Wireless security settings and guest separation

What usually fixes it

  • Moving or re-aiming access points
  • Channel and power changes
  • Roaming settings on the devices and the network
  • Adding access points only where the measurements show a gap

See Wi-Fi site surveys and a sample report.

All guides

Last updated November 16, 2026.

Questions

Can we just add more access points?

Adding access points without measuring often makes it worse, because they interfere with each other. Measure first, then add only where the survey shows a gap.

Robot down or acting up?

Email hello@granitecoastrobotics.com with the make, model and what it is doing. The link opens an email with those questions filled in. Or use the request form.